Rad Canyon Work Party This Saturday April 10th!
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Rad Canyon Work Party This Saturday April 10th!
Well... the rebuild is completed and now we just need a healthy and ambitious group of Utah BMXers to come out and put the last bits of TLC in to getting Rad Canyon "race ready" for the season. The county will be turning on the water for us this weekend so it should give us a good head start on prepping the track and getting in some early practices.
The work party will be from 10:00am to 2:00pm this Saturday April 10th (weather permitting). Please bring out your own rakes and shovels in case we run out.
Thanks and see you this Saturday!
Steve
The work party will be from 10:00am to 2:00pm this Saturday April 10th (weather permitting). Please bring out your own rakes and shovels in case we run out.
Thanks and see you this Saturday!
Steve
Last edited by sspencer on Tue Apr 06, 2010 11:31 am, edited 3 times in total.
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
UTAH BMX Charter Member
Re: Rad Canyon Work Party This Saturday!
I've got an 11:00 am appt. but I can run out after that I'll be right around the corner..Can't wait to see what you have created for us to enjoy MR.Spencer
McCauley
McCauley
Re: Rad Canyon Work Party This Saturday!
Save some work for next weekend... Vegas whirlwind trip then Easter this weekend.
- Scott Mckay
- GT
- Posts: 112
- Joined: Wed Jan 09, 2008 12:04 am
- Location: Centerville
Re: Rad Canyon Work Party This Saturday!
AAaaahh !!!! Same as Brent, going to Vegas, save some work for us. I can't wait to check out what you've created for us this year.
Re: Rad Canyon Work Party This Saturday!
The triathlon season kicks off this weekend in st george for our family. Would love to help out next week during the week if there is more to do.
I am unvailing the COG tri bike this weekend too!
I am unvailing the COG tri bike this weekend too!
Follow the fanny pack to the finish
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Re: Rad Canyon Work Party This Saturday!
Well I guess all of you guys are just going to miss out then this weekend. I was so pleased with the rebuild that I was going ask Ron to change the name from "Rad" Canyon to "Gnarly" Canyon. I guess the few of us who show up on Saturday will get to partake of the early fruits of our labor and get our "gnarly" on without the crowds
Steve
Steve
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
UTAH BMX Charter Member
Re: Rad Canyon Work Party This Saturday!
Weather forecast doesn't look good, but me and the kids will come down unless it is a blizzard. Thaddeus is DYING to go down that gate ever since he saw some pictures of it.
Re: Rad Canyon Work Party This Saturday!
chya, gnaaarly dude can't wait......
They say there's more to life than a BMX bike....
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Re: CANCELLED - Rad Canyon Work Party This Saturday!
With the weather not cooperating over the next few days we will reschedule the work party for next Saturday April 10th from 10:00am to 2:00pm. Please plan to come out then with rakes and shovels in hand to get the 2010 Rad Canyon dialed in.
Please stay tuned for any other updates.
Thanks,
Steve
Please stay tuned for any other updates.
Thanks,
Steve
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
UTAH BMX Charter Member
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Re: Rad Canyon Work Party This Saturday April 10th!
We are on for a work party this Saturday from 10:00am to 2:00pm! Come out and lets get Rad Canyon race ready for 2010!
Look forward to seeing everyone out!
Steve
Look forward to seeing everyone out!
Steve
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
UTAH BMX Charter Member
- billyschuler
- GT
- Posts: 158
- Joined: Wed Jun 17, 2009 3:21 pm
Re: Rad Canyon Work Party This Saturday April 10th!
for you guys that arent too worn out after the work aprty, the alpine "801" trails are having the DEMON DIRT JUMP JAM, this will be a sick event for those of you who are into dirt jump and for those of you who have not seen a live up close dirt jump event, you should check it out, these guys go HUGE!.hit up christian peper on face book for directions!! hope to see some of you there as well!
Freedom Energy/ODEN/Dirt Militia Team Manager
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Re: Rad Canyon Work Party This Saturday April 10th!
RAD CANYON WORK PARTY IS ON TODAY FROM 10:00am to 2:00pm! COME ON OUT!
THANKS!
Steve
THANKS!
Steve
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
UTAH BMX Charter Member
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Re: Rad Canyon Work Party This Saturday April 10th!
THANK YOU to everyone that showed up to the track yesterday to help with the finishing touches. It is coming together nicely.
We will be holding a practice/work party today (Sunday) at the track from 11:00 to 2:00pm so come on out and check out the NEW Rad Canyon track for 2010! It is still a little soft in places but the more people we can get on it with their bikes the quicker it will pack in.
Be on the look out for a practice schedule to be posted soon so you can get plenty of time in on the track prior to the May 6th season opener race.
See you at the track!
Steve
We will be holding a practice/work party today (Sunday) at the track from 11:00 to 2:00pm so come on out and check out the NEW Rad Canyon track for 2010! It is still a little soft in places but the more people we can get on it with their bikes the quicker it will pack in.
Be on the look out for a practice schedule to be posted soon so you can get plenty of time in on the track prior to the May 6th season opener race.
See you at the track!
Steve
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
UTAH BMX Charter Member
Re: Rad Canyon Work Party This Saturday April 10th!
The track is awesome! We are going to have a great summer on this thing! Thanks steve and Jason for the build! Good stuff right thar uh huh!!
Who is online
Users browsing this forum: No registered users and 7 guests