Bike Changes

Anything and everything about the Utah BMX scene.

Moderators: JAlvey, bnd

Post Reply
User avatar
J Gallo
Web Guy
Posts: 1964
Joined: Thu Apr 22, 2004 7:14 pm
Location: West Jordan, UT
Contact:
Contact J Gallo

Bike Changes

Postby J Gallo » Mon Mar 28, 2005 2:36 pm

Anyone making any bike part changes (or whole bike changes)?

I took advantage of the 3 hours of sunshine this weekend and took my bike out to replace some parts.

I put on some Supercross handlebars with Dirtec brake lever. I also upgraded to Lizard Skins lock-on flangeless logo grips, man those things are NIIIIIIIIIICE!! (Thx I & H!!)

I also replaced my brakes with Odyssey A brakes with new pads.

I don't know if it was just being off my bike for awhile, but my front end seems SOOO much lighter. :)

Bring on the outdoor!
Gallo
"The ability to walk fully upright is overrated. Along with tying your own shoes."
Top
User avatar
Dave W
28-35 State Champ
Posts: 73
Joined: Mon Sep 13, 2004 3:44 pm
Location: Taylorsville, Utah
Contact:
Contact Dave W

Bike Changes

Postby Dave W » Mon Mar 28, 2005 2:42 pm

On my 20" I switched my redline fork to a Supercross. I just replaced my Sinz cranks and Shimano square taper bottom bracket for an FSA Platimunm Pro Isis bb and FSA Cranks. I'm about to build new wheels hopefully Crupi hubs, Ti Spokes, and probably Rhino Lite Rims. That will depend on my wifes level of patience with me. Just wish I could ride somewhere.
Top
User avatar
Curtis Newkirk
Photog Extraordinaire
Posts: 821
Joined: Wed Jul 14, 2004 1:02 am
Location: Riehen, Switzerland
Contact:
Contact Curtis Newkirk

Postby Curtis Newkirk » Tue Mar 29, 2005 9:46 am

Friday I picked up Bennett a Staats Mini Al frame and ordered a Scythe Mini fork. I am not sure what the built bike will weight, but the frame is 1.6 lb. and the fork .91. The geometry is much better than the insanely steep head tube angle on his Diamondback.

Dave, are you considering selling your old BB, cranks, & wheels? I may be interested as I really want to build up a 20" for myself.
~Curtis
Top
User avatar
justinsbmxmom
SE Floval Flyer
Posts: 257
Joined: Mon May 10, 2004 8:19 pm
Location: Idaho Falls
Contact:
Contact justinsbmxmom

Postby justinsbmxmom » Tue Mar 29, 2005 9:50 am

Bryan is building me a PK Ripper. So far we have the frame and a landing gear fork and rims which I think are Arayas. All the other parts are in debate. It might be a few years before it's finished at the rate we're going.
Jenni - SE Ridin' BMX Chic
Top
User avatar
sspencer
Factory Bikini Cuts Hotshoe
Posts: 618
Joined: Thu Jun 24, 2004 2:11 pm
Location: Draper, UT

Postby sspencer » Tue Mar 29, 2005 2:52 pm

Curtis,
Without trying too hard, you should have Bennett's bike under 12lbs, even close to 10lbs if you start shaving, drilling and cutting :P
It is possible.

I am building a micro-mini for my lil' guy (long-term project since he just barely turned 2) and I am shooting for under nine-pounds :shock:

Steve
Spence'- dizzle fo'- shizzle
UTAH BMX Charter Member
Top
User avatar
Dave W
28-35 State Champ
Posts: 73
Joined: Mon Sep 13, 2004 3:44 pm
Location: Taylorsville, Utah
Contact:
Contact Dave W

bike changes

Postby Dave W » Tue Mar 29, 2005 3:00 pm

Curtis - good idea then my wife may be a little bit happier. Let me know if you want them
Dave
815-9654 cell
Top
User avatar
J Gallo
Web Guy
Posts: 1964
Joined: Thu Apr 22, 2004 7:14 pm
Location: West Jordan, UT
Contact:
Contact J Gallo

Postby J Gallo » Wed Mar 30, 2005 7:18 am

Curtis Newkirk wrote:Friday I picked up Bennett a Staats Mini Al frame and ordered a Scythe Mini fork.


Since Bennett and I are running the same district # (26), does that mean I can be your honorary son? I could use that same set up but in Pro Cruiser size! :) :wink:
Gallo
"The ability to walk fully upright is overrated. Along with tying your own shoes."
Top
User avatar
bnd
Information Minister
Posts: 2863
Joined: Fri Apr 30, 2004 11:01 pm
Location: Cottonwood Heights, Utah

Postby bnd » Wed Mar 30, 2005 8:54 am

(long-term project since he just barely turned 2)


So I take it this means the kid will be a top ten NAG rider in the 5 & under class by the end of this year? Hehe.

b.
Top
User avatar
tread
Old School Bike Expert
Posts: 177
Joined: Sat May 01, 2004 10:11 pm
Location: Tooele, Utah

Postby tread » Wed Mar 30, 2005 9:08 am

I got my 2005 Fuzz Pro built up, can't wait to ride it now.
Image
Top
User avatar
Curtis Newkirk
Photog Extraordinaire
Posts: 821
Joined: Wed Jul 14, 2004 1:02 am
Location: Riehen, Switzerland
Contact:
Contact Curtis Newkirk

Postby Curtis Newkirk » Wed Mar 30, 2005 1:40 pm

J Gallo wrote:Since Bennett and I are running the same district # (26), does that mean I can be your honorary son? I could use that same set up but in Pro Cruiser size! :) :wink:


Yes, Gallo, but you will be the redheaded step son who gets the old used stuff :lol:

Steve - I am thinking around 10 lb. as a sane weight :wink:

Dave - drop me a line with what you would like to get for your old stuff.
~Curtis
Top
User avatar
JasonStout
GT
Posts: 776
Joined: Tue May 04, 2004 1:07 pm
Location: St. George, Utah
Contact:
Contact JasonStout

Postby JasonStout » Sat Apr 02, 2005 1:23 pm

I purchased a new chain. I hadn't changed the one off of the Redline I bought from TP. It had like a gazillion dead links in it. It's like riding a whole new bike.

I also took a link out of the chain on my cruiser. I wanted to move the back wheel up a little. I think I'm ready to spend more time on the back wheel!

I also did some work on the spokes of my wheels. They had loosed up a little. Now they are tight and strong!

I also bought a number so it almost looks like a real number plate. I know ya'll won't recognize me with a real number on a plastic plate!

#6 and #16

Peace

Jason Stout
Top
Post Reply

Return to “UtahBMX”

Who is online

Users browsing this forum: No registered users and 15 guests