PIC of the day! *revamped*
- bnd
- Information Minister
- Posts: 2863
- Joined: Fri Apr 30, 2004 11:01 pm
- Location: Cottonwood Heights, Utah
PIC of the day! *revamped*
*Edit - If it's rad & it's on 2 wheels, post it up!*
I'm going to try to post up an oldschool BMX picture once a day, hope you enjoy it.
This is Supercross's Vet Pro from FLA, Bill Madden in BMXA from 1988.
b.
I'm going to try to post up an oldschool BMX picture once a day, hope you enjoy it.
This is Supercross's Vet Pro from FLA, Bill Madden in BMXA from 1988.
b.
- BMXER4LIFE
- Master of the Snap
- Posts: 19
- Joined: Mon Jan 03, 2005 8:43 pm
- Location: Taylorsville
Bill Madden photo
Hey, I'm pretty sure I still have this issue somewhere around here. Remember when we all ran our posts that high? OUCH!
-
- Queen of Sheba
- Posts: 172
- Joined: Mon Jul 26, 2004 11:03 am
- Location: W Jordan, UT
- Contact:
- Curtis Newkirk
- Photog Extraordinaire
- Posts: 821
- Joined: Wed Jul 14, 2004 1:02 am
- Location: Riehen, Switzerland
- Contact:
- sspencer
- Factory Bikini Cuts Hotshoe
- Posts: 618
- Joined: Thu Jun 24, 2004 2:11 pm
- Location: Draper, UT
Thanks for posting up the pic' Bruce! It is hard to believe that was nearly 16 years ago!!!
Here are some facts surrounding the photo:
- Location: Norco/Snipes track in Corona, CA. The track is downhill and the first turn was LONG and FAST. It lead to the jump we were hitting in the second straight (a 25' long table wih a step down landing).
- Who was there? Tim "Fuzzy" Hall, Chris "Mad Dog" Moeller (owner of S&M Bikes), Eddie Buckley and Spike Jonze.
- Gork (the editor of BMX Action magazine at the time, now the BMX big wig at Redline bicycles) asked me if I wanted to be the "model". I was stoked.
- The photgrapher was Spike Jonze. For those of you not in the know, Spike is BIG TIME now. He has directed the Beastie Boys "Sabotage" and Weezer's "Just Like Buddy Holly" videos, directed and acted in a few movies ("Being John Malkovich" , "Three Kings", "Adaptation", "JackAss"). He is also married to director Sofia Coppola (daughter of the famous director/producer Francis Ford Coppola)
- We were jumping over Spike and he was holding his camera up in the air underneath us taking the shots. I was probably 8 to 9 feet in the air in the shot.
Thanks for the memories!
Steve
Here are some facts surrounding the photo:
- Location: Norco/Snipes track in Corona, CA. The track is downhill and the first turn was LONG and FAST. It lead to the jump we were hitting in the second straight (a 25' long table wih a step down landing).
- Who was there? Tim "Fuzzy" Hall, Chris "Mad Dog" Moeller (owner of S&M Bikes), Eddie Buckley and Spike Jonze.
- Gork (the editor of BMX Action magazine at the time, now the BMX big wig at Redline bicycles) asked me if I wanted to be the "model". I was stoked.
- The photgrapher was Spike Jonze. For those of you not in the know, Spike is BIG TIME now. He has directed the Beastie Boys "Sabotage" and Weezer's "Just Like Buddy Holly" videos, directed and acted in a few movies ("Being John Malkovich" , "Three Kings", "Adaptation", "JackAss"). He is also married to director Sofia Coppola (daughter of the famous director/producer Francis Ford Coppola)
- We were jumping over Spike and he was holding his camera up in the air underneath us taking the shots. I was probably 8 to 9 feet in the air in the shot.
Thanks for the memories!
Steve
- Curtis Newkirk
- Photog Extraordinaire
- Posts: 821
- Joined: Wed Jul 14, 2004 1:02 am
- Location: Riehen, Switzerland
- Contact:
LOL. So Spike Jonez shot that. Go figure because I think it is one of the top BMX shots I have seen.
Peep the Kevlar Tuff-Wheels on Poulsens' ride. Also, if you look closely, he is using a forged cro-mo one-piece crank. Kind of an unusual spec. I know I ran Flites starting in about '79 - '80. Had it not been for the Flites I would probably have run a forged one-piece as well. Remember how shoddy most of the Al cranks were back then?
Peep the Kevlar Tuff-Wheels on Poulsens' ride. Also, if you look closely, he is using a forged cro-mo one-piece crank. Kind of an unusual spec. I know I ran Flites starting in about '79 - '80. Had it not been for the Flites I would probably have run a forged one-piece as well. Remember how shoddy most of the Al cranks were back then?
~Curtis
Who is online
Users browsing this forum: No registered users and 18 guests